THE ARTEMIS PROJECT
PRIVATE ENTERPRISE ON THE MOON
Thermal Control Systems
Section 4.3.4.
Home Tour Join! Contents Team News Catalog Search Comm

Insulation for the Lunar Habitat

We can rely on the thermal mass of the habitat and heaters for a while. The reference mission calls for having the robot pile up the insulation after the crew has headed home. We wouldn't want the crew shoveling dirt during their short stay. The space station relies on just a few layers of insulation to handle the temperature extremes, so we should be able to get by for a while with insulation. Of course, the space station is snuggled up to a nice, warm planet throughout its life.

So this becomes a challenge for the robotics technical committee more than anyone else.

The basic concept -- and it's no more than that -- is to use some equipment added to a derivative of the rover that Carnegie-Mellon is working on in the partnership with LunaCorp. Our thinking was to put a bolt pattern on the rover's structure to accommodate the added equipment (whatever it is), and connectors for power and data. The basic design provides mobility, high-resolution video, power, navigation, and communication.

We haven't yet worked out how much mechanical power is needed to move move dirt or how to protect the robots at night. We also haven't worked out any numbers on thermal stability and how fast the lunar base will lose heat before we can put a blanket over it. So right now we're going on a gut feeling; my gut feeling, a fact which scares me -- the only reliability there is trusting intuition derived from several years of designing spaceships and reading hundreds of technical papers about lunar bases. With that caution in mind: my gut feeling is that the habitat will make it through at least one lunar night with no problem. We're more worried about the robot itself because the robot is more exposed to heat loss.

Next summer CMU is going to test the lunar rover in the desert. That gives us a timeframe for learning more about what it can really do, and developing conceptual mission plans to test against the rover's capabilities.

This whole area needs a lot more creative thought and serious number-crunching. Two ideas are using sandbags or lunar bricks.

The simplest solution might be just to pile dirt on the module. If access to the external side of the pressure shell is an issue, we might have the crew throw a tarp over the module and provide stand-offs to support it away from the pressure vessel. The robot would then be building a cave around the module. Moon dirt tends to stick to itself (and everything else) so that cave might turn out to be quite rigid after rolling a rover over it a few times.

Thermal Control Systems

Home Tour Join! Contents Team News Catalog Search Comm
ASI W9600323r1.1. Copyright © 2007 Artemis Society International, for the contributors. All rights reserved.
This web site contains many trade names and copyrighted articles and images. Refer to the copyright page for terms of use.
Author: Gregory Bennett. Maintained by ASI Web Team <asi-web@asi.org>.
Submit update to this page. Maintained with WebSite Director. Updated Sat, Aug 28, 1999.